How to Calculate Sod Area

Calculating the area for sod installation is an essential step in ensuring that you purchase the right amount of sod for your lawn. Here is a step-by-step guide to help you calculate sod area accurately:

Step 1: Measure the Length and Width of the Area

Using a measuring tape, measure the length and width of the area where you want to install sod. Make sure to measure the widest and longest points of the area to get an accurate measurement.

Step 2: Multiply the Length and Width

Once you have the measurements, multiply the length and width together to get the total square footage of the area. For example, if the length is 20 feet and the width is 10 feet, the total square footage would be 200 square feet (20 x 10 = 200).

Step 3: Account for Irregular Shapes

If the area you are measuring is not a perfect rectangle or square, you will need to break it down into smaller sections and calculate the area of each section separately. Once you have calculated the area of each section, add them together to get the total square footage.

Step 4: Add Extra Sod

It is always a good idea to add a little extra sod to your order to account for any waste or mistakes during installation. A good rule of thumb is to add an extra 10-15% to your total square footage.

Step 5: Round Up

When ordering sod, it is typically sold in increments of 10 square feet. Round up your total square footage to the nearest increment of 10 to ensure that you order enough sod for your project.

In conclusion, calculating the area for sod installation is a simple process that requires accurate measurements and a little extra planning. By following these steps, you can ensure that you order the right amount of sod for your lawn and avoid any unnecessary waste or expenses.